BODY SHOP ( UNDER BODY )

"Overhead Electric Monorail System FORD Body Shop Under Body"

General Specification

1. Machine Cycle Time : Max65sec
2. Conveyor Type : Electric Monorail System Front and Rear Floor transfer Line is composed two(2) line, and two Telescopic Lift,a Drop Lift and two Repair Line
3. Carrier
2-1. EMS Carrier Arm Openning Type
2-2. EMS Carrier is composed one(1) Drive Trolley, one(1) Middle Trolley and two(2) Idle Trolley
2-3. No. of EMS Carrier : Front Floor Carrier : 5sets. Rr Floor Carrier : 7sets Hypoid Geared Motor of EMS Drive Unit : 0.2kw, 4P,220V,50HZ
2-4. Speed of EMS Carrier : Max. 60m/min by Inverter Controller

BODY SHOP ( SIDE PANEL )

"Overhead Electric Monorail System PROTON Body Shop Side Panel "

1. Machine Cycle Time : Max65sec
2. Conveyor Type : Electric Monorail System
RH and LH Side Structure transfer Line is composed two(2) line, and two(2) Telescopic Lift, two(2) Drop Lift and a Repair Line 3. Carrier
3-1. EMS Carrier Arm Openning Type
3-2. EMS Carrier is composed one(1) Drive Trolley,
one(1) Middle Trolley and two(2) Idle Trolley
3-3. No. of EMS Carrier : RH Side Carrier : 6sets. LH Side Carrier : 6sets.

BODY SHOP ( ROOF )

"PROTON Body Shop (Bus Bar) Roof"

1. Machine Cycle Time : Max65sec
2. Conveyor Type : Electric Monorail System Roof transfer Line is composed one(1) line and one(1) Repair Line
3. Carrier
3-1. EMS Carrier with Lift Type
3-2. EMS Carrier is composed one(1) Drive Trolley, two (2) Middle Trolley and two(2) Idle Trolley
3-3. No. of EMS Carrier : 4sets.. Hypoid Geared Motor of EMS Drive Unit : 1.5kw, 4P,220V,50HZ

BODY SHOP ( MAIN BODY )

"Overhead Electric Monorail System FORD Body Shop (Bus Bar) "

1. Machine Cycle Time : Max65sec
2. Conveyor Type : Electric Monorail System Main body transfer Line is composed one(1) line and one(1) Repair Line
3. Carrier
3-1. EMS Carrier Arm Openning Type
3-2. EMS Carrier is composed one(1) Drive Trolley, two (2) Middle Trolley and two(2) Idle Trolley
3-3. No. of EMS Carrier : 15sets.. Hypoid Geared Motor of EMS Drive Unit : 1.5kw, 4P,220V,50HZ

BODY SHOP ( METAL FINISH )

" Wide single slat conveyor GM Body Shop"

1. Machine Cycle Time : Max65sec
2. Conveyor Type : Conveyor Type : Slat Conveyor Fitting And Finishing Line is composed a Main single Slat Conveyor
3. Detail of Equipment
3-1. Work Station Pitch : 5000mm
3-2. No. of Work Station : 19
3-3. Slat Plate
Checked Plate 6t, 3000mm(W) X 245mm(L) Fixture of Body Setting : 39set